THE COMPLETE DIY GUIDE FOR GARAGE DOOR SPRING REPLACEMENT

The Complete DIY Guide for Garage Door Spring Replacement

The Complete DIY Guide for Garage Door Spring Replacement

Blog Article

Your garage door springs are crucial to the proper functioning of your garage door. They provide the necessary tension to lift the door and help it operate smoothly. However, over time, these springs can wear out and need replacing. If you're dealing with a malfunctioning garage door, garage door spring replacement, might be the solution you need. This guide will walk you through the steps involved in replacing garage door springs and offer helpful tips for a smooth repair process. 

Why Do Garage Door Springs Fail? 

Garage door springs work under a lot of stress. Every time the door opens or closes, the springs stretch and contract, bearing the full weight of the door. Due to this constant tension, the springs eventually wear out. The most common reasons for spring failure include: 


  • Age: Over time, springs lose their elasticity and tension, leading to a malfunction. 



  • Corrosion: Exposure to moisture or humidity can cause rust and weaken the springs. 



  • Improper maintenance: Neglecting routine maintenance can accelerate wear and tear on the springs. 


Recognizing the signs of spring failure early can save you from more expensive repairs down the line. 

Signs That You Need to Replace Your Garage Door Springs 

Several signs indicate that your garage door springs may need replacement: 

  • The door is difficult to lift manually or won't stay up. 



  • You hear a loud, snapping sound, which often signals a broken spring. 



  • The door opens unevenly or gets stuck halfway. 



  • The springs appear visibly worn, cracked, or rusted. 


If any of these symptoms occur, it's important to address the issue promptly to prevent additional damage to the door system. 

Replacing Your Garage Door Springs: A Step-by-Step Approach 

Replacing garage door springs requires careful attention and the right tools. If you’re ready to tackle the task yourself, follow these detailed steps to ensure a safe and successful replacement. 

Step 1: Disconnect the Power and Secure the Door 

Before beginning, disconnect the power to your garage door opener to prevent accidental operation. Secure the door by clamping it in place, ensuring it won’t fall while you work. 

Step 2: Identify the Type of Spring 

The type of spring in your garage door (torsion or extension) will determine the replacement parts you need. Torsion springs are mounted above the door, while extension springs are located along the sides. 

Step 3: Remove the Broken Spring 

To remove the old spring, unwind the torsion spring carefully using winding bars. Torsion springs are under extreme tension, so be extra cautious during this step. For extension springs, simply detach them from the pulley system. 

Step 4: Install the New Spring 

Install the new spring in the same position as the old one, making sure it's properly aligned and tensioned. Follow the manufacturer’s instructions for the correct winding process for torsion springs. 

Step 5: Test the Garage Door 

Once the new spring is installed, reconnect the power and test the door. Open and close the door a few times to ensure it operates correctly. Adjust the spring tension if necessary. 

Conclusion 

Garage door spring replacement is an essential repair that ensures your garage door operates smoothly and efficiently. Whether you’re performing the replacement yourself or calling a professional, it’s crucial to address spring failure as soon as possible. A properly functioning garage door spring enhances both safety and convenience, giving you peace of mind for years to come. 

 

Report this page